Metal drills

Jobber length drill with straight shank, diameter 4.5mm with an overall length of 80mm and flute length of 47mm according to DIN 338 standard with 135° split point, cobalt based HSS-E with...

Jobber length drill with straight shank, diameter 4mm with an overall length of 75mm and flute length of 43mm according to DIN 338 standard with 135° split point, cobalt based HSS-E with bronze...

Jobber length drill with straight shank, diameter 3.5mm with an overall length of 70mm and flute length of 39mm according to DIN 338 standard with 135° split point, cobalt based HSS-E with...

Jobber length drill with straight shank, diameter 3mm with an overall length of 61mm and flute length of 33mm according to DIN 338 standard with 135° split point, cobalt based HSS-E with bronze...

Jobber length drill with straight shank, diameter 2.5mm with an overall length of 57mm and flute length of 30mm according to DIN 338 standard with 135° split point, cobalt based HSS-E with...

Jobber length drill with straight shank, diameter 2mm with an overall length of 49mm and flute length of 24mm according to DIN 338 standard with 135° split point, cobalt based HSS-E with bronze...

Drill set in standard plastic cassette consisting out of 25 jobber length drills with straight shank, A777 diameters 1.0 up to 13.0mm in increments of 0.5mm, according to DIN 338 standard with...

Jobber length drill with taper shank, diameter 22mm with an overall length of 248mm and flute length of 150mm according to DIN 345 standard with 118° thinned conical point, HSS with steam...

Jobber length drill with taper shank, diameter 21.5mm with an overall length of 248mm and flute length of 150mm according to DIN 345 standard with 118° thinned conical point, HSS with steam...

Jobber length drill with taper shank, diameter 21mm with an overall length of 243mm and flute length of 145mm according to DIN 345 standard with 118° thinned conical point, HSS with steam...

Jobber length drill with taper shank, diameter 20.5mm with an overall length of 243mm and flute length of 145mm according to DIN 345 standard with 118° thinned conical point, HSS with steam...

Jobber length drill with taper shank, diameter 20mm with an overall length of 238mm and flute length of 140mm according to DIN 345 standard with 118° thinned conical point, HSS with steam...